Sharp BP-10C20 Quick Start Manual page 18

BEFORE USING THE MACHINE
3
• To load 11" x 17" paper
Remove the divider plate. Move the divider plate all the way over to the paper feed opening side (right side), and pull
up to remove. Insert the removed divider plate into A.
• The stack must not be higher than the indicator line.
• Do not add paper.
4
18
Insert the paper into the tray.
• Load the paper with the print side facing up. Make sure
the stack of paper is straight before loading it.
• Place the paper under the roller on the right side of the
tray.
Roller
• Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
• After loading the paper, close the guides to the paper
width not to leave the gap from the guides A and B.
• Do not load the paper as shown below.
A
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.