4
Select a format, and then press OK.
Set SmartPower timer
With the SmartPower timer, you can configure
the time for the display of the PhotoFrame to
turn on or turn off automatically. When the
display automatically turns off, the PhotoFrame
goes to standby (sleep) mode.
Note
•
Ensure that the current time of the
PhotoFrame is set correctly.
1
In the home screen, select [Settings] and
then press OK.
2
Select [SmartPower], and then press OK.
3
Select [Set On-Time] / [Set Off-Time],
and then press OK.
•
To switch off the SmartPower
function, select [Off] and then press
OK.
4
Move the joystick up/down/right/left to
set time, and then press OK.
Tip
•
When the PhotoFrame is in standby (sleep)
mode, you can press
PhotoFrame.
to wake up the
EN
25