Table of Contents
Advertisement
Note
‡
If the PhotoFrame is disconnected from the power
supply for a long time, you need set time and date again
after you turn on the PhotoFrame.
Set SmartPower timer
:LWK WKH 6PDUW3RZHU WLPHU \RX FDQ FRQÀJXUH
the time for the display of the PhotoFrame to
turn on or turn off automatically. When the
display automatically turns off, the PhotoFrame
goes to standby (sleep) mode.
Note
‡
Make sure that the current time of the PhotoFrame is
set correctly.
1
Select [SmartPower], and then press OK.
2
Select [Set On-Time] / [Set Off-Time],
and then press OK.
3
Move the joystick up/down/right/left to set
time, and then press OK.
‡
To switch off the SmartPower function,
select [Off] and then press OK.
Tip
‡
When the PhotoFrame is in standby (sleep) mode, you
can press
to wake up the PhotoFrame.
14
EN
Hibernate the PhotoFrame
1
Select [Hibernate], and then press OK.
2
Select an option, and then press OK.
» After the selected period, the
PhotoFrame hibernates.
‡
To disable the hibernation function,
select [Never] and then press OK.
‡
To wake up the PhotoFrame, press .
Slideshow setting
1
Select [Slideshow], and then press OK.
Advertisement
Table of Contents
