9 Upgrade the PhotoFrame 10 Product information 11 Frequently asked questions 12 Glossary Need help? Please visit www.philips.com/welcome where you can access a full set of supporting materials such as user manual, the latest software updates and answers to frequently asked questions.
From the planning, design and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back...
The Netherlands, Belgium, Norway, Sweden and Denmark. In U.S.A., Philips Consumer Lifestyle North America has contributed funds for the Electronic Industries Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profi...
2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this Philips Digital PhotoFrame, you can use the PhotoFrame to: • Display JPEG photos •...
Overview of your PhotoFrame • Press to switch mode: slideshow/ clock/calendar • Hold to turn on/off the PhotoFrame • Press to go back • Hold to go to the home screen c OK (Joystick) • Press to confi rm a selection •...
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No.
Turn on the PhotoFrame Note • When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically. When the PhotoFrame is turned off and connected to the power supply, hold turn on the PhotoFrame. For the fi rst time you turn on the PhotoFrame: •...
Transfer media Transfer photos with a storage device Caution • Do not disconnect the storage device from the PhotoFrame during media transfer. The PhotoFrame supports most types of the following storage device: • Secure Digital (SD) • Secure Digital High Capacity (SDHC) •...
When the transfer is complete, disconnect the USB cable from the computer and the PhotoFrame. » The PhotoFrame reboots. • You can transfer media from the PhotoFrame to a computer. • The transfer speed depends the operating system and the software confi guration of the computer.
4 Display photos Note • You can display JPEG photos in slideshow mode on the PhotoFrame. If there is no message created before, at power up select [Start PhotoFrame] and then press OK. In the home screen, select [Play], and then press OK.
Page 12
Select [Zoom]. Press OK repeatedly to zoom in the photo (or exit the zoom mode). Move the joystick to pan the photo. Press MENU. Select [Crop and Save], and then press » A confi rmation message is displayed. Select [Yes], and then press OK. •...
5 Browse Browse and manage albums and media You can browse and manage albums and media in wave mode or album mode. • Wave mode: • Album mode: Browse albums: In the home screen, select [Browse] and then press OK. »...
Album menu: • [Add to Favorites]: Add media in the album to the [Favorites] album • [Copy]: Copy media in the album to another album • [Move]: Move media in the album to another album • [Delete]: Delete media in the album •...
Rename an album Select [Rename], and then press OK to confi rm. » A keypad is displayed. Move the joystick downwards twice to enter the keypad. To enter the name (about 24 characters), select an alphabet/number and then press • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK.
6 Clock Display the clock In the home screen, select [Clock] and then press OK. » A clock/calendar is displayed. Clock menu When a clock/calendar is displayed, press MENU to enter the clock menu. • [Select Clock]: Move the joystick left/ right to select another clock or calendar to be displayed.
7 Message Create a message Note • At power up, select [Personalize Frame] to add a message to your photo or to view a message. In the home screen, select [Message] and then press OK. Select [Add a message to your photo], and then press OK.
• [Message Name]: Enter the name. For details, see “Enter the name of a message”. • [Repeat]: Select a repeat frequency • [Set Date]: Set the date or day • [Set Time]: Set the time After you complete the message, select [Done] and press OK.
Page 19
Move the joystick to select one of the following options to edit a message. • [Change Photo]: Change the photo of the message • [Edit Message]: Edit the message To change the photo of a message: Select [Change Photo], and then press Select a photo available on the PhotoFrame, and then press OK.
Move the joystick up/down/right/left to position the text, and then press OK. Move the joystick up/down/right/left to select the color or font of the text, and then press OK. Move to , and then press OK. Select [Done], and then press OK. View a message In the home screen, select [Message] and then press OK.
8 Settings Select an on-screen language In the home screen, select [Settings] and then press OK. Select [Language], and then press OK. Select a language, and then press OK. Adjust brightness You can adjust the brightness of the PhotoFrame to achieve the best view. In the home screen, select [Settings] and then press OK.
Set time/date In the home screen, select [Settings] and then press OK. Select [Time and Date], and then press Select [Set Time] / [Set Date], and then press OK. Move the joystick up/down/right/left to adjust minute/hour/day/month/year, and then press OK. Set time/date format In the home screen, select [Settings] and then press OK.
Set SmartPower timer With the SmartPower timer, you can confi gure the time for the display of the PhotoFrame to turn on or turn off automatically. When the display automatically turns off, the PhotoFrame goes to standby (sleep) mode. Note •...
• When the PhotoFrame is in standby (sleep) mode, you can press to wake up the PhotoFrame. Hibernate the PhotoFrame In the home screen, select [Settings] and then press OK. Select [Hibernate], and then press OK. Select an option, and then press OK. »...
Select [On], and then press OK. • To disable the auto orientation function, select [Off] and then press Turn button sound on/off In the home screen, select [Settings] and then press OK. Select [Set Beep], and then press OK. To turn on the button sound, select [On] and then press OK.
Select [Enable Delete] / [Disable Delete], and then press OK. Set demo on/off Note • The demo function is only effective during photo slideshow. In the home screen, select [Settings] and then press OK. Select [Demo], and then press OK. Select [On], and then press OK.
Slideshow setting Select slideshow interval In the home screen, select [Settings] and then press OK. Select [Slideshow], and then press OK. Select [Interval], and then press OK. Select a slideshow interval, and then press OK. Select slideshow sequence In the home screen, select [Settings] and then press OK.
Select transition effect In the home screen, select [Settings] and then press OK. Select [Slideshow], and then press OK. Select [Transition Effect], and then press Select a transition effect, and then press Select background color You can select a background border color for photos that are smaller than the PhotoFrame display.
» If you select a background color, the PhotoFrame displays a photo with a background color. » If you select [Auto-fi t], the PhotoFrame extends a photo to fi ll the screen with picture distortion. Power meter In the home screen, select [Settings] and then press OK.
Select [Info]. » The information of the PhotoFrame is displayed on the screen. Reset all settings to factory default In the home screen, select [Settings] and then press OK. Select [Default Settings], and then press » A confi rmation message is displayed. Select [Yes], and then press OK.
• Do not power off the PhotoFrame during upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. Visit www.philips.com/support. Search for your PhotoFrame and go to the software section.
Power mode supported: AC powered • Effi ciency level: V • Average consumption (system on): 4.8 W • Power adaptor: • Manufacturer: Philips Consumer Lifestyle International B.V. • Model number: SSW-1918xx-y (xx=EU, UK, AU, BR; y=1,3) • Input: AC 100-240V ~ 50-60Hz 0.3A •...
Page 33
• Slideshow setting: Transition effect, background color, view mode, interval, shuffl e, color tone • Color tone: Black and white, Sepia, other colors • Screen background: Black, white, grey, auto fi t, RadiantColor • Settings: Language, brightness, time and date, SmartPower, hibernate, auto orientation, beep (button sound), memory card protection, demo, slideshow settings, information of the...
11 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I use the PhotoFrame to delete photos on a memory card? Yes, it supports operations to delete photos on an external device, such as a memory card.
12 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-defi nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.