Operating; Function - Goldstar R1203 Owner's Manual

OPERATING

• CAUTION
When the air conditioner has been performing its cooling operation and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.

FUNCTION

Off
Med
Fan
Low
Fan
Low Cool
Operation
5
4
3
2
1
Thermostat
• FOR NORMAL COOLING
1. Turn the Operation Knob to the High Cool from the
Low Cool setting.
2. Set the Thermostat control to the desired tempera-
5
ture mark (the mid-point is a good starting posi-
tion). If the room temperature is not satisfactory after
a reasonable time, adjust the control to a cooler or
warmer setting, as appropriate.
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat control as needed.
Off
High
Cool Med Fan
Low Fan
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Med
Cool
Low Cool - Cooling with low speed fan operation.
6
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the larger marks for greater cool-
7
ing. Point the arrow to the smaller marks for more moderate cooling.
8
(i.e. the higher number the greater cooling)
9
- Turns air conditioner off.
- Med speed fan operation without cooling.
- Low speed fan operation without cooling.
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High Cool
setting.
2. Set the Thermostat control to the largest
perature mark.
• AUTO SWING(For R1403)
On : Air swing is operated while Operation knob is
set to the Cool position.
Off : Stops the operation of air swing.
- 3 -
Auto Swing
Off On
tem-
9