Maintenance; Filters Cleaning Instructions; Care And Cleaning Of Chrome And Special Finishes - Dolphin BC5083-01 User Manual

MAINTENANCE

F I LT E R C L E A N I N G I N S T R U C T I O N
This tap is provided with a stainless steel filter preventing foreign particles to enter
the lines. If the water flow has decreased, this may be because the filter is clogged.
The filter can be cleaned as follows:
1. For DB/X/XL 400 + 425:
a. Shut-off the water shut off valve.
b. Disconnect the water supply pipe from the adaptor and disassemble the filter
from it.
c. Wash the filter under running water.
d. Reassemble the parts.
e. Restore the incoming water supply.
f. Make sure that there is no water leakage.
2. For DB 450 + DB 475
a. Release the screws at the panel and remove it. Turn off the regulating valve.
b. Disassemble the solenoid valve by opening the nuts.
c. Remove the filter and wash it under running water.
d. Reassemble the filter.
e. Reassemble the solenoid valve.
f. Turn on the regulating valve and adjust the flow capacity.
g. Make sure that there is no water leakage. Re-assemble the wall cover panel.
C A R E A N D C L E A N I N G O F C H R O M E A N D S P E C I A L
F I N I S H E S
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the
like. Use of any prohibited cleaning or maintenance products or substances could
damage the surface of the tap. For surface cleaning of tap us ONLY soap and water,
then wipe dry with clean cloth or towel. When cleaning bathroom tile, the taps should
be protected from any splattering of harsh cleansers.
18 | Dolphin Blue | DBL400 / DBL425 / DBXL450 / DBXL475 Series