Tap Installation - Dolphin BC5083-01 User Manual

TAP INSTALLATION

INSTALLATION INSTRUCTIONS FOR DB/L/XL 400 + DB/L/XL 425
STEP 1 – INSTALLING THE TAP
1. Shut off the water supply
2. Drill a hole (23 to 24 mm) at the place where you want to install the spout of the
tap.
3. If your model includes an optional anti-rotation pin, drill a small hole just above the
previous one for the anti-rotation pin.
4. Insert the tap and its attachments through the wall. The aerator at the tap spout
must face the washbasin.
5. Insert the anti-rotation pin into the small hole (if needed)
6. Fix the base behind the wall with the hexagonal nut and the disk.
8 | Dolphin Blue | DBL400 / DBL425 / DBXL450 / DBXL475 Series