Battery Replacement Instructions - Dolphin BC5083-01 User Manual

BATTERY REPLACEMENT
BATTERY MODELS ONLY
When the battery weakens, the red indicator light will blink at a constant rate when the
user's hands are within the sensor range. The battery must be replaced within two
weeks.
To replace the battery (battery models only):
1. For DB/L/XL 400: Open carefully the batteries' box and remove the old batteries.
Replace the used batteries with six new 1.5V AA batteries. Close the box.
2. For DB 450: Release the screws at the panel and remove it. The battery box is
located behind the panel. Open carefully the battery's box and replace the used
battery with a new 9V battery (Lithium battery is recommended). Close the box
and re-assemble the wall cover panel.
Important: Tap was supplied with A Self Adjusting Sensor. The ideal sensor range for
the specific location will be set automatically again after changing the battery.
Check that there are no
objects in front of the sensor
after the battery replacement
was completed.
Important: Spent batteries should not be disposed of with normal
household waste. Contact your local authority for information on waste
disposal and recycling.changing the battery.
After you have replaced the battery, move
away from the sensor range. Wait 15 seconds
in order to allow the system to set the ideal
sensor range. Then after the self adjustment has
taken place the solenoid valve will be opened
and closed for 1 second as an indication that
the ideal sensor range was set and the product
is ready for use.
DBL400 / DBL425 / DBXL450 / DBXL475 Series | Dolphin Blue | 17