Manual Tests; On The Air Call To Mobile; Bluetooth Test; System Connector Test - Sony Ericsson K530i Test Instructions

5.2

Manual Tests

5.2.1

On The Air Call To Mobile

To verify the function of the speaker, microphone, polyphonic ring signal and
volumes button.
1. Insert an operator SIM card and start the phone.
2. Set up a call from another phone to the mobile phone.
3. Answer the phone call.
4. Check that the polyphonic ring signal is working and that the backlight switches
on OK.
5. Also check that the quality of the sound both in the mobile phone and the other
phone are OK.
6. Press the volume key up and down and check that the volume in the phone is
altered.
7. End the call.
8. Check that the ending procedure is OK and that the speech time is displayed.
5.2.2

Bluetooth Test

To verify that the Bluetooth communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the Bluetooth function by entering Connectivity/Bluetooth and turn it on.
3. Set up a link between the phone and another Bluetooth compatible device. If a
connection can be established the Bluetooth module is considered working.
5.2.3

System Connector Test

Hands free equipment and a charger are used in this test, to check the functionality
of the System Connector.
1. Insert a SIM card, connect a battery and start the unit.
2. Connect the Hands free equipment to the system connector and set up a call and
listen if you can speak/hear in the hands free set.
3. Connect the charger to the system connector and see if the phone starts to
charge and if the charging is indicated in the display.
2/000 21-2/FEA 209 544/136 C
©
Company Internal Sony Ericsson Mobile Communications AB
Test Instruction, Electrical
10(11)