Real Time Clock Test; Manual Tests; Sim Test; Infrared Test - Sony Ericsson W550c Test Instruction, Mechanical

3.11

Real Time Clock Test

This test will check if the built in real time clock works.
1. Select "Real Time Clock" from the "Service Tests" menu and press the "Select" key.
2. The words "Real Time Clock Please wait...." will be displayed on the screen. After a few
seconds you will get information whether the clock is ok or not.
3. After the test results are displayed the test will end and return to the Service Tests menu.

4 Manual Tests

4.1

SIM Test

To verify that the phone can detect a SIM:
1. Insert a SIM card, connect a battery and start the unit.
2. When prompted select "Start Phone".
3. If the SIM is detected the phone will start "Searching" for a signal. If the SIM is not
detected the phone ask you if you would like to "Shut down" the phone.
4.2

Infrared Test

To verify that the Infrared (IR) communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the IR function by entering the menu and selecting:
Settings/Connectivity/Infrared port/10 Minutes.
3. Set up an infrared link between an IR test device and the mobile. If a link can be
established, the IR module is considered fully functional.
4. Press and hold the "!" key to get back to the main screen.
4.3

Bluetooth

To verify that the Bluetooth communication is functioning properly:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the Bluetooth function by entering the menu and selecting: Settings/
Connectivity/Bluetooth/Turn On.
3. Set up a Bluetooth link between the mobile and another device. If a link can be
established, the Bluetooth module is considered fully functional.
4. When test is completed, turn off the Bluetooth function and press/hold the "!" to return
to the main screen.
2/000 21-1/FEA 209 544/96 A
©
Company Internal Sony Ericsson Mobile Communications AB
Test Instruction, Mechanical
7(9)