Wireless Lan Hotspot Connection Mode (Recommended); Ios Device Mobile Printing - Sharp DX-B352P Manual

5.2.

Wireless LAN hotspot connection mode (recommended)

Instead of the using the access point (wireless router), you can connect mobile device with
the Wireless LAN hotspot of wireless network printer.
5.2.1.

iOS device mobile printing

Only the AirPrint -certified printers are applicable for using AirPrint feature. Please check out
whether AirPrint -certified symbol is printed on the carton of the printer.
5.2.1.1. The operating systems which support iOS mobile printing
Applicable for iOS7.0 or higher version.
5.2.1.2. Preliminary preparations
1. A printer with wireless network feature.
2. iOS mobile device.
5.2.1.3. How to use AirPrint mobile printing
The printing steps may vary by application, for example when printing PDF:
1. Turn on the printer.
2. Connect the iOS mobile device with wireless network of the printer (Please refer to Chapter 4.2
for how to connect).
3. Start the application (such as PDF).
4. Select document and tap
5. Tap "print".
6. Please make sure the SHARP printer is selected.
If you selected another printer (or failed to select any printer), please tap the pull-down
menu of the printer, and select your SHARP printer.
7. Set printing parameters, e.g. print pages.
8. Tap "Print".
Note: • If print failed, check whether the iOS mobile device is connected to the printer's
wireless hotspot (Wireless LAN).
• If the iOS mobile device did not detect any printer, check whether the printer is
powered on.
.
47