Recovering The Unit - Bosch DIVAR IP all?in?one 5000 Series Installation Manual

30 en | Maintenance
1.
2.
3.
4.
5.
6.
7.
8.
9.
6.2

Recovering the unit

Following procedure describes how to restore the factory
default image.
To restore the unit to factory default image:
1.
2.
2019.08 | V1 | DOC
On the BVMS default screen, press CTRL+ALT+DEL.
Hold SHIFT, click Switch User and keep SHIFT pressed for
about five seconds.
Enter user name and password.
On the Desktop, in the Tools folder, right-click the
Enable_SuperDoctor_5_Service script, and then click Run
as administrator.
Double-click the SuperDoctor 5 Web icon in the same
folder.
Log on to the web interface using the following default
credentials:
User Name: ADMIN
Password: ADMIN
Click the Configuration tab, and then click Password
Settings and change the default password.
Click the Configuration tab, and then click Alert
Configuration.
Activate the SNMP Trap feature and specify the IP address
of the receiver for SNMP traps.
Start the unit and press F7 during the BIOS power-on-self-
test.
The Recovery menu is displayed.
Select one of the following:
– Initial factory setup: restores to factory default image
and deletes all data on the HDDs.
or
– System Recovery (back to Factory Defaults): restores
to factory default image; data on the HDDs will not be
deleted.
DIVAR IP all-in-one 5000
Bosch Security Systems B.V.