Remote Connection To The System; Protecting The System From Unauthorized Access; Setting Up Port Forwarding; Choosing An Appropriate Client - Bosch DIVAR IP all?in?one 5000 Series Installation Manual

28 en | Remote connection to the system
To perform further functionalities refer to the BVMS manual
available in the online product catalog.
5

Remote connection to the system

This section describes the steps that are required to access the
DIVAR IP system from the internet.
5.1 Protecting the system from unauthorized
access
In order to protect the system from unauthorized access, we
recommend that you follow strong password rules before
connecting the system to the internet. The stronger your
password, the more protected your system will be from
unauthorized persons and malware.
5.2

Setting up port forwarding

In order to access a DIVAR IP system from the internet through a
NAT/PAT capable router, port forwarding must be configured on
the DIVAR IP system and on the router.
To set up port forwarding:
4
–
–
The DIVAR IP system is now accessible from the Internet.
5.3

Choosing an appropriate client

This chapter describes the ways that allow remote connection
to a DIVAR IP system through the internet.
There are 2 ways to make a remote connection:
–
–
2019.08 | V1 | DOC
Enter following port rules in the port forwarding settings of
your internet router:
port 5322 for SSH tunnel access using BVMS Operator
Client.
port 443 for HTTPS access to VRM using
Video Security Client or Video Security App.
Remote connection with Operator Client, page 29.
Remote connection with Video Security App, page 29.
DIVAR IP all-in-one 5000
Bosch Security Systems B.V.