Technical Data - Graco XM Series Installation-Parts

Technical Data

XM Plural-Component OEM Sprayer
Mixed ratio range
Ratio tolerance range
Flow rates
Minimum
Maximum
Fluid viscosity range
Fluid filtration
Air inlet
Fluid inlets without feed kits
Ambient temperature range
Operating
Storage
Maximum fluid working pressure of mixed material
50:1
70:1
Maximum fluid temperature
Air supply pressure range
Maximum pump air set pressure
50:1
70:1
Maximum pump inlet fluid feed pressure
Maximum air consumption at
100 psi (0.7 MPa, 7.0 bar) in scfm (m
Noise dB(A)
Operating Pressure 70 psi (0.48 MPa, 4.8 bar)
Sound power
Sound pressure
Operating Pressure 100 psi (0.7 MPa, 7 bar)
Sound pressure
Sound power
Environmental conditions rating
Indoor/outdoor use
Altitude
Maximum relative humidity
Pollution degree
Installation category
* Minimum flow rate is dependent on material being sprayed and mixing capability. Test your material specific to flow rate.
313292J
3 gal./min.
200-20,000 cps (heavier viscosities can be mixed using heat,
60 mesh, (238 micron) standard on pump outlets (filter assembly
32-135° F
30-160° F
50-150 psi
^
3/min.)
To 99% up to 130° F
US
1:1-10:1 (in 0.1 increments)
+/- 5%
1 qt./min.
circulation, and/or pressure feeding)
not included on some models)
3/4 npt(f)
1 1/4 npt(m)
5200 psi
6300 psi
160° F
100 psi
90 psi
250 psi
70 scfm per gpm (1.96 m^3min. per lpm)
84.6 dB(A)
94.9 dB(A)
91.6 dB(A)
101.9 dB(A)
Up to 4000 m
11
2
Technical Data
Metric
0.95 liter/min.*
11.4 liter/min.
0-57° C
-1-71° C
35.8 MPa, 358 bar
43.5 MPa, 435 bar
71° C
0.35-1.0 MPa, 3.5-10.3 bar
0.68 MPa, 6.8 bar
0.62 MPa, 6.2 bar
1.7 MPa, 17 bar
To 99% up to 54° C
29