Installation And Setup; Connect Air Lines; Connect Fluid Hoses; Connect Air Hoses - Graco XM Series Installation-Parts

Installation and Setup

See Dimensions, page 27, to aid in component
installation.

Connect Air Lines

Refer to component identification in F
Refer to the pneumatic schematic drawings in the XM
Plural-Component Sprayer repair-parts manual 313289
for guidance.
• Connect air lines (68, 69) between the fluid control
assembly (B) and the control box (C).
• Connect air lines (68, 69) between the air controls
assembly (E) and the control box.

Connect Fluid Hoses

Use the following illustration as a guide to connect the
fluid hoses.
Recirculation
Hose (gray)
Hose to Pump
Lower (black)

Connect Air Hoses

• Connect air hose (12) between air inlet manifold and
air controls assembly. (Hose called out as 12(C)).
313292J
•
. 1, page 11.
IG

Connect Sensor Cables

Connect pressure and temperature sensor cables
(supplied with fluid control assembly (B)) to the fluid
control module.
Fluid
Control
Module
Recirculation
Hose (gray)
Connect air hose (12) between air controls
assembly and both air motors. Hose called out has
12(A) and 12 (B).
12(B)
12 (A and B)
Installation and Setup
12(A)
12(C)
B
r_xmaa00_313292_4a
19