Cisco Catalyst 2960 Installation Manual page 19

Chapter 1 Switch Installation
Slide the retainer through the first latch. See
Step 3
Figure 1-19
1 AC power cord
2 Smaller sleeve for thin power cords
Slide the retainer through the other latches to lock it. See
Step 4
Figure 1-20
1 AC power cord
2 Sleeve for thin power cords
(Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for
Step 5
thin cords. Detach the sleeve, and slide it over the power cord. See
OL-19732-04
Sliding the Retainer Through the Latch
1
2
Locking the Retainer
1
2 3
Installing the Power Cord Retainer (Optional)
Figure 1-19.
RA TI NG
10 0- 24 0~
12 -6 A, 50
-6 0H z
3
3 Latch
Figure 1-20.
RA TI NG
10 0- 24 0~
12 -6 A, 50
-6 0H z
3 Latches
Figure
Catalyst 2960-S Switch Hardware Installation Guide
1-21.
1-19