Table of Contents
Advertisement
Serial ATA3 Connector
(SATA_1:
see p.1, No. 11)
USB 2.0 Header
(9-pin USB_5_6)
(see p.1, No. 1)
Chassis Fan Connectors
(4-pin CHA_FAN1)
(see p.1, No. 27)
(4-pin CHA_FAN2)
(see p.1, No. 28)
(4-pin CHA_FAN3)
(see p.1, No. 29)
System Fan Connectors
(4-pin SYS_FAN3)
(see p.1, No. 16)
(4-pin SYS_FAN4)
(see p.1, No. 26)
(4-pin SYS_FAN5)
(see p.1, No. 19)
(4-pin SYS_FAN6)
(see p.1, No. 25)
(4-pin SYS_FAN7)
(see p.1, No. 22)
(4-pin SYS_FAN8)
(see p.1, No. 24)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
4 3 2 1
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
4 3 2 1
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
This SATA3 connector
supports SATA data
cables for internal storage
devices with up to 6.0
Gb/s data transfer rate.
There is one header on
this motherboard. This
USB 2.0 header can
support two ports.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
J3455 Pro BTC+
13
Advertisement
Table of Contents
