I/O Enclosure Components; I/O Enclosures Configured With 2.5-Inch Hot-Swap Hard Disk Drives - IBM x iDataPlex dx340 Series Problem Determination And Service Manual

I/O enclosure components

This section lists replaceable components that are available for the I/O enclosure.

I/O enclosures configured with 2.5-inch hot-swap hard disk drives

The following replaceable components are available for I/O enclosures that are
configured with 2.5-inch hot-swap hard disk drives.
Table 4. CRUs and FRUs, I/O enclosures configured with 2.5-inch hot-swap hard disk drives
Index Description
1 Power-supply paddle card domain B
2
2 I C multiplexer card
3 2x2 2.5-inch hot-swap SAS backplane
4 I/O enclosure
5 PCIe adapter
6 PCIe adapter bay cover
7 Two-slot PCIe riser-card assembly (2x4 with 2x16 connectors)
8 2.5-inch drive filler panel
SAS hard disk drive (see Table 2 on page 61 for the supported
9
drives)
10 2.5-inch hot-swap drive cage with backplane
66
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide
CRU part CRU part
number number
(Tier 1) (Tier 2)
39Y7311
44W4832
44W4859
26K8680
44W4800
FRU part
number
44E8765
44W4799
44X0449