Playing A Disc; Selecting A Different Track; About Mp3 - Philips AZ1834/12 User Manual

About MP3

The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
•
Getting MP3 files:
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
•
Creating a MP3 CD:
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
– Make sure that the file names of the MP3 files
end with .mp3 or .wma.
– Number of albums: maximum
– Number of tracks: maximum
– The length of file names affects the number of
tracks for playback. With shorter file names,
more files can be burned on a disc.

Playing a disc

This player plays Audio Discs including CD-R/
CD-RW, MP3 CD and WMA. Do not try to
play a CD-ROM, CD-I, CDV,VCD, DVD or
computer CD.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may
be unplayable by this product.
DRM-protected WMA disc is not supported.
•
1 Adjust the source selector to
CD/USB/AUX.
Disconnect the line-in cable if it is connected
•
to an external device and AUX IN jack on
the set.
➜ Display shows - - - with "DISC"(see 2), or
- - - with "USB" (see 3)
you can either download
burn the music files
500
999
2 Press CD to enter CD mode if USB is dis-
played.
➜ Display will show --- with "DISC"(See 2).
3 Open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
➜ Display:The total number of tracks
appears.
5 Press 2; to start playback.
➜ Display: 2 and the current track number.
For MP3-CD/ WMA only:
➜ The current track number "XXX" and
album number "ALBXXX" will be
displayed interchangeably (See 4 5).
6 To pause playback press 2;.
➜ Display: 2 and the current track number
flash.
7 Press 2; again to resume playback.
8 To stop playback, press 9.
Helpful hints:
The disc playback will also stop when:
– you open the disc compartment door;
– you select FM, MW or OFF position;
– the disc has reached the end of the playback.

Selecting a different track

• Press ∞ or § once or repeatedly until the
desired track number appears in the display.
For MP3-CD/WMA: First press
ALBUM+/- once or more to find your
album.
• In the pause/stop position, press 2; to start
playback.