Table of Contents
Advertisement
MP3/WMA/CD Player
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
•
Getting MP3 files:
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
•
Creating an MP3 CD:
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful Hints:
Make sure that the file names of the MP3 files
–
end with .mp3
.
Total number of music files and albums: around
–
400 (with a typical file name length of 20
characters)
The length of file names affects the number of
–
tracks for playback. With shorter file names, more
files can be burned on a disc.
Playing a disc
•
This CD player plays Audio Discs including
CD-Recordables (CD-R), CD-Rewritables
(CD-RW) and MP3/WMA CD.
•
CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may
be unplayable by this product.
DRM-protected WMA disc is not support.
•
1 Press SOURCE on the system repeatedly or
press CD on the remote control to select
the CD source.
2 Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
➜
flashes
contents of a disc and then Audio CD: the
total number of tracks appears. (See 3).
you can either download
burn the music files
as the CD player scans the
3 Press 2; to start playback.
4 To pause playback, press 2;.
➜ Display : 2 and the track number flash.
(See 4)
5 To resume, press 2; again.
6 To stop playback, press 9.
Helpful hints:
CD play will also stop when:
–
you open the CD door;
–
you select TUNER, MP3 LINK or USB;
–
the CD has reached the end.
Selecting a different track
Press ∞ / § once or repeatedly until the
•
desired track number appears in the display.
For MP3/WMA-CD: First press
(or ALBUM/PRESET 3/4 on the remote
control)
once or more to select your album.
In the pause/stop position, press 2; to start
•
playback.
Finding a passage within a
track
1 During playback, press and hold ∞ or §.
➜ The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Helpful hints:
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 40 tracks in the desired
sequence. If you like, store any track more
than once.
ALB -/+
Advertisement
Table of Contents
