Selecting A Different Track; About Mp3; Playing A Disc - Philips AZ1133/58 User Manual

CD/MP3 Player

About MP3

The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
•
Getting MP3 files:
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
•
Creating a MP3 CD:
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
– Make sure that the file names of the MP3 files
end with .mp3.
– Number of albums: maximum 99
– Number of tracks: maximum 400
– The length of file names affects the number of
tracks for playback. With shorter file names,
more files can be burned on a disc.

Playing a disc

This player plays Audio Discs including CD-R/
CD-RW, MP3 CD. Do not try to play a CD-
ROM, CD-I, CDV,VCD, DVD or computer
CD.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may
be unplayable by this product.
you can either download
burn the music files
1 Adjust the Source selector to CD/MP3.
2 Open the CD door.
3 Insert a CD with the printed side facing up,
then press the CD door gently to close.
➜ Display shows ---, and later the total
number of tracks.
4 Press 2; to start playback.
5 To pause playback, press 2;.
➜ Display: 2 and the current track number
flash (See 2).
6 To resume, press 2; again.
7 To stop playback, press 9.
Helpful hints:
CD play will also stop when:
–
you open the CD door;
–
you select FM, MW or OFF;
–
the disc has reached the end.

Selecting a different track

• Press ∞/ § once or repeatedly until the
desired track number appears in the display.
For MP3-CD: First press ALBUM+ once
or more to find your album.
➜ "ALBUM" and the selected album number
will be displayed and flashed briefly
(See 3).
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Helpful hints:
–
When your searching reaches the end of the
last track, the disc goes to stop mode.