Clock - Philips FW-C10/22 User Manual

RECORDING
5 Press STOP•OPEN on tape deck 1 and
tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to start
recording.
™ The
starts flashing.
REC
4 Press PAUSE to interrupt recording.
5 Press STOP•OPEN on tape deck 1 to
stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
18
pg 01-22/C10/22-Eng 18

CLOCK

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3 BAND
CD TUNER
TUNING
SEARCH STOP• CLEAR
DIGITAL
DSC
SOUND
PROGRAM CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about seven
seconds.
• Press CLOCK•TIMER briefly.
or 22:38" (the current
™ "10:38
PM
time) will be displayed depending on
whether you have selected 12- or 24-
hour mode.
™ "--:--" will be displayed if the
clock is not set.
3/7/00, 5:05 PM
•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
TAPE 1 • 2 VIDEO MASTER
VOLUME
TAPE AUX
PRESET
PLAY• PAUSE PREV NEXT
DIM
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "12:00 " or
AM
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK•TIMER to select clock
mode.
2 Press PROGRAM to select 12- and 24-
hour mode.
™ If 12-hour mode is selected,
"12:00" starts flashing and the
AM
lights up.
™ If 24-hour mode is selected,
"00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
5 Press CLOCK•TIMER again to store the
setting.
3139 116 19311