Tape - Philips FW-C10/22 User Manual

TUNER
™ The system will search for every
available station in the FM waveband
first, MW and then search the LW
waveband.
™ All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™ The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) to select the
desired waveband : FM, MW or LW.
3 Press PROGRAM for less than one
second.
™ The PROG flag starts flashing.
™ The next available preset number will
be displayed for selection.
pg 01-22/C10/22-Eng 15
4 Press à or á to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press 4 or 3 to
select the desired preset number.
5 Press PROGRAM again.
™ The PROG flag disappears and the
radio station will be stored.
• Repeat steps 3 – 5 to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
" PROGRAM FULL ". If you want to
change an existing preset number,
repeat steps 3 – 5.
– You can cancel manual programming by
pressing Ç (on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press 4 or 3 to select the desired
preset number.
™ The preset number, radio frequency,
and waveband appear on the display.

TAPE

C10
FW- MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3 BAND
CD TUNER
TUNING
SEARCH STOP• CLEAR PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
PROGRAM CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
TAPE 1
PLAY/ REC
FULL AUTO STOP
Loading a tape
1 Press STOP•OPEN.
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the left.
4 Close the tape deck door.
3/7/00, 5:05 PM
TAPE 1 • 2 VIDEO MASTER
VOLUME
TAPE AUX
PRESET
NEXT
DIM
TAPE 2
PLAYBACK
15
3139 116 19311