Loading A Tape; Tape Playback; Rewind/Fast Forward; Selecting External Equipment - Philips FW 316C Instructions For Use Manual

Poi ee errr Ae reemnes,
TAPE
Loading a tape
e Press STOP*OPEN.
¢ The tape deck door opens.
e Load the tape with the
open side downward and
the full spool to the left.
e Close the tape deck door.
Tape Playback
1 Press TAPE to select TAPE mode.
— "TRFE* will be displayed.
2 Load the tape into the selected tape deck.
3 Press PLAY > to start playback.
¢ To interrupt playback, press PAUSE.
¢ To resume playback, press PAUSE again,
4 Press STOPeOPEN to end playback.
Rewind/Fast Forward
At the stop mode
1 You can rewind or fast forward a tape by pressing <<
or >> respectively.
~ The tape will stop automatically at the end of
rewinding or fast forwarding,
2 Press STOP*OPEN to stop rewinding or fast
forwarding.
Se ee. ee were eee ee ee
Nt nt ee Oe te tt ee
PO eR ee ern ene Seep a hy it et a ate I
Continuous Playback From Tape Deck 2
to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY > on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY > on tape deck 1.
— Playback will begin with tape deck 2 and will
continue with tape deck 1 when playback on tape
deck 2 ends.
6 Press STOPeOPEN if you want to stop playback
before the end of the tape in tape deck 1 or tape
deck 2.
Notes:
— During rewinding or fast forwarding of a tape, it is
also possible to select another source mode (e.g. CD,
TUNER or AUX mode).
— Check and tighten slack tape before use with a pencil.
Slack tape may get jammed or may burst in the
mechanism.
~ C€-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this
system.
— Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxes).
pirdgs
Pehl ¢
MINI HIFISYSTEM
YAPZ 4" TAPT 2 VIDEO
J C=)
Selecting External Equipment
if you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the enhanced sound
from the system.
e Press AUX to select the external mode.
— "AU will be displayed.
Note:
— All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.