Clock/Timer; View Clock; Clock Setting; Timer Setting - Philips FWC170/25 User Manual

STANDBY
ON
ECO
POWER
DIGITAL
SOUND CONTROL
IMPORTANT!
When in Eco Power standby mode, it is not
possible to show the clock time or set the
clock/timer function.

View clock

The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
G Press CLOCK•TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.

Clock setting

The clock can be set in either 12-hour or
24-hour mode ("12:00
example)
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
2
Press PROGRAM repeatedly to select clock
mode.
➜ "12:00
" or "00:00" star ts flashing.
AM
3
Press à or á on the system repeatedly to set
the hour.
4
Press í or ë on the system repeatedly to set
the minute.
TAPE 1 • 2
BAND
" or "00:00" for
AM
MASTER VOLUME
5
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts working.
To exit without storing the setting
G Press Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.

Timer setting

The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
Clock/ Timer
2
CD 1/2/3 TUNER TAPE 1/2 DIM
REPEAT SHUFFLE SLEEP
VOL
í ë
Ç É Å
á á
DSC DBB MUTE
MUTE NEWS/TA
23