Demonstration Mode; Switching The System On; Switching The System To Standby Mode; Switching The System To Eco Power Mode (< 1 Watt) - Philips FWM372/05 User Manual

Demonstration mode

The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press and hold 9 on the
system for 5 seconds to switch to
demonstration.
To deactivate the demonstration
● Press and hold 9 on the system for 5 seconds to
switch to standby mode.

Switching the system on

In standby/demonstration mode
●
Press ECO POWER/STANDBY ON/B to
switch on the last selected source.
●
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX.
●
Press OPEN•CLOSE, DISC 1/2/3(CD 1/2/
3), DISC CHANGE.
➜
The system will switch to CD mode.
In Eco Power standby mode
●
Press ECO POWER/STANDBY ON/B to
switch on the last selected source.
●
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX on the remote control.
Switching the system to standby
mode
In demonstration mode
● Press and hold 9 on the system.
In any other source mode
●
Press ECO POWER/STANDBY ON/B.
➜
The clock will appear on the display when the
system is in standby mode.
Basic Functions
Switching the system to Eco
Power mode (< 1 Watt)
●
Press and hold ECO POWER/STANDBY
ON/B until "ECO POWER" is displayed.
➜
The display screen will go blank.
➜
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.

Dim mode

You can select the desired brightness for the
display.
●
In any source mode, press DIM MODE
repeatedly to select DIM 1, DIM 2, DIM 3 or
DIM OFF display mode.
➜
is shown, except for DIM OFF mode.
DIM

Volume control

Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob anti-clockwise or press VOLUME –)
the sound level.
To listen through the headphones
●
Connect the headphones plug to
the n socket at the front of the
system.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTE" is displayed.
●
To restore the volume, press MUTE again or
increase the volume level.
13