Specifications - Philips FWM372/05 User Manual

Specifications

AMPLIFIER
Output power
FWM372 .............................................. 2 x 120 W MPO
................................................................. 2 x 60 W RMS(1)
FWM572 .............................................. 2 x 220 W MPO
.............................................................. 2 x 110 W RMS(1)
Signal-to-noise ratio .......................... 67 dB A (IEC)
Frequency response .......................... 50 – 15000 Hz
Input sensitivity
AUX/CDR In ................................ 500 mV / 900mV
Output
Speakers .................................................................... 6 Ω
Headphones ...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10% THD)
CD/MP3-CD PLAYER
Number of programmable tracks ......................... 99
Frequency response ............. 50 – 20000 Hz -3dB
Signal-to-noise ratio ....................................... 75 dB A
Channel separation .......................... 60 dB (1 kHz)
Total harmonic distortion ........................... < 0.003%
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
Sampling frequencies ....................... 32, 44.1, 48 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range ................................ 531 – 1602 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
MW ............................................................ Loop antenna
USB PLAYER
USB ................................................................... 12Mb/s, V1.1
......................................... support MP3 and WMA files
Number of albums/folders ................. maximum 99
Number of tracks/titles ...................... maximum 400
28
(128 kbps advised)
TAPE PLAYER
Frequency response
Normal tape (type I) ...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................. 48 dB A
Wow and flutter .............................................. ≤ 0.4% JIS
SPEAKERS
System 2-way; double port bass reflex
Impedance ........................................................................ 8 Ω
Woofer ...................................................................... 1 x 5.5"
Tweeter .......................................................................... 1 x 2"
Dimensions (w x h x d)
FWM372 ................................. 248 x 310 x 195 (mm)
FWM572 ................................. 248 x 310 x 230 (mm)
Weight
FWM372 ........................................................... 3.3 kg each
FWM572 ........................................................... 3.8 kg each
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power ..................................... 220 – 230 V / 50 Hz
Power Consumption
Active
FWM372 .................................................................. 80 W
FWM572 ............................................................... 170 W
Standby .................................................................. ≤ 15 W
Eco Power standby ........................................ ≤ 1 W
Dimensions (w x h x d)
FWM372 ................................. 265 x 310 x 367 (mm)
FWM572 ................................. 265 x 310 x 384 (mm)
Weight (without speakers)
FWM372 .................................................................. 7.15 kg
FWM572 ..................................................................... 8.8 kg
Specifications and external appearance are
subject to change without notice.