Chauvet EPIX STRIP User Manual page 13

Programming
Product
Maintenance
Refer to the ArKaos MediaMaster™ software manual for detailed
instructions on installing and programming this product.
To maintain optimum performance and minimize wear, clean this product
frequently. Usage and environment are contributing factors in determining
the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces
light output performance and can cause overheating. This can lead to
reduced light source life and increased mechanical wear.
To clean your product:
Unplug the product from power.
Wait until the product has cooled.
Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
Clean all external surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens
cleaning tissue, not to the product.
Wipe any dirt or grime to the outside edge of the surface. Gently polish
the surfaces with the lint-free cotton cloth or lens cleaning tissue until
they are free of haze and lint.
Always dry the external surfaces carefully after cleaning them.
Page 13 of 16
ÉPIX™ Strip User Manual