Chauvet EPIX STRIP User Manual page 12

ÉPIX™ Strip User Manual
Mounting
Orientation
Rigging
Procedure
Product
Mounting
Diagram
Before mounting this product, read the
User Manual.
Always mount this product in a safe position making sure there is adequate
room for ventilation, configuration, and maintenance.
The ÉPIX™ Strip includes an adjustable mounting bracket with three (3)
10 mm holes. CHAUVET® recommends using the following general
guidelines when mounting this product:
When selecting an installation location, consider easy access to this
product for operation, programming adjustments, and routine
maintenance.
Make sure to mount this product away from any flammable material as
indicated in the Safety Notes
Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
If hanging this product, make sure that the mounting location can
support the product's weight. Refer to the
section of this manual for the weight-bearing requirements for this
product.
The ÉPIX™ Strip comes with an adjustable mounting bracket with three (3)
10 mm holes to which you can attach clamps. This bracket may also serve
as a floor or wall mount support. You must supply your own clamps and
make sure the clamps are capable of supporting the weight of this product.
Horizontal
Adjustment
Screws
Page 12 of 16
Safety Notes at the beginning of this
section of this manual.
Technical Specifications