Tuning to radio stations
1
Press STANDBY ON
source.
2
Adjust SOURCE (or press TUNER on the remote) to
select TUNER mode.
3
Press TUNER again to select the desired band : FM or
MW.
Press and hold S or T until the frequency indication
4
starts to change, then release.
➜ The system automatically tunes to the next strong radio
station.
L
R
G To tune to a weak station, press S or T briefly and
repeatedly until an optimal reception is found.
5
Repeat step 4 if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 stations regardless of the
reception.
1
Tune to your desired radio station (refer to "Tuning to
radio stations").
2
Press PROGRAM.
➜ "PROG" icon appears.
3
Use the numeric keypad (0-9) to select the desired
preset number.
➜ If "PROG" icon goes off before you select the desired
preset number, press PROGRAM again.
L
R
PROG
4
Press PROGRAM again to store the radio station.
G Repeat steps 1–4 to store other radio stations.
Helpful Hints:
– During programming, if no key is pressed within five
seconds, the system will exit the programme mode
automatically.
y
to switch on the last selected
Radio Reception
Listening to preset radio
stations
G In tuner mode, press 1 or 2 or use the numeric keypad
(0-9) to select the desired preset number.
➜ The preset number, radio frequency, and waveband are
displayed.
R
R
19
ADIO
ECEPTION