Preparations; Inserting Batteries Into The Remote Control; Switching On The System; System Setup (Dvd) - Philips MC-D370/30 Quick Use Manual

Preparations

Inserting batteries into the
remote control
1
Open the battery compartment.
2
Place the batteries in the
compartment with the correct
polarity as indicated by "+" and "-"
symbols.
3
Close the cover.
CAUTION!
– Remove batteries if they are exhausted or if the
remote is not to be used for a long time.
– Do not use old and new or different types of
batteries in combination.
– Batteries contain chemical substances, so they
should be disposed off properly.

Switching on the system

1
After completing all the connections, connect the AC
power cord of the player to the power outlet.
2
Press STANDBY ON to switch on the last selected
source.
3
Adjust the SOURCE button (or press DISC, TUNER or
AUX/TV on the remote) to select the input source.
The selected source will be displayed.
For viewing a DVD or VCD disc, a TV set needs to be
connected (refer to "Connections - Connecting a TV").
Switch on the TV and set to the correct video in channel
(for example, EXT1, EXT2, AV1, AV2). Refer to your TV
instruction manual for details.
The default screen appears on the TV.
P
10
REPARATIONS

System Setup (DVD)

The system setup is carried out via the TV, enabling you to
customise the DVD micro system to suit your particular
requirement. If the preferred options selected are not
available on a disc, then the disc's own preference will be
used.
IMPORTANT !
To access the System Setup menu, playback must
be stopped.
1, 5
2, 3
4
To enter System Setup menu
1
In disc mode, press SYSTEM MENU on the remote.
icon will be highlighted in the menu bar on the TV
screen.
Press 4 to activate the System Setup menu.
2
Use 34 keys to select one of the setup menu options and
3
press 2 to enter the menu.

Picture Setup

Sound Setup
Language Setup
Feature Setup
4
Press OK to confirm your selection.
5
To exit the System Setup menu, press SYSTEM MENU.