Maintenance And Care; Servicing Guidelines - Echo DPAS-300 Operator's Manual

Maintenance and care

Observe the following precautions when checking and maintaining your product after use:
 Turn power to unit off, remove battery, and make sure all moving parts have come to a complete stop.
An accident could occur if the product starts unexpectedly.
 Allow unit to cool before performing service.
You could burn yourself.
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.

Servicing guidelines

Area
Battery
Screws, bolts and nuts
Maintenance and care
If you have any questions or problems, please contact your dealer.
Cleaning battery and battery compartment
Troubleshooting table
 For spare parts and consumables, please use only genuine parts and designated products and components.
Using parts from other manufacturers or non-designated components may result in a malfunction.
IMPORTANT
Maintenance
Inspect/Clean/Charge
Inspect, Tighten/Replace
IMPORTANT
Maintenance and care
WARNING
Page
9
-
 Risk of electric shock or fire. Do not use conducting ma-
terials to clean battery or battery compartment.
1. Release trigger switch and trigger switch lockout and allow
A
the attachment head to stop.
2. Make sure power indicator LED is not illuminated.
3. Depress battery pack latch release (A) slide battery pack out
of power head.
4. Use compressed air or a soft bristle brush to remove debris
from battery and battery compartment.
14
Before use
•
•
WARNING
Monthly