Connecting An Additional Appliance; Connecting A Usb Device - Philips MCM239D/79 User Manual

Philips micro hi-fi system mcm239d made for ipod mp3/wma-cd playback
Hide thumbs Also See for MCM239D/79:
Table of Contents

Advertisement

Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM antenna
The wire antenna supplied can only be used to
receive nearby stations. For better reception we
recommend using a cable antenna system or an
outdoor antenna.
1
Extend the wire antenna and fit it to FM
ANTENNA as shown below
Note: If you are using a cable antenna system or
an outdoor antenna, fit the antenna plug, instead of
the wire antenna, to FM ANTENNA .
2
Move the antenna in different positions for
optimal reception (as far away as possible from
the TV, VCR or other radiation sources)
3
Fix the antenna's end to the wall.
Helpful hints:
– To receive optimal radio reception, put the main
unit and the antennas as far away as possible from
the power adaptor.
MCM239D_79_Eng
Connecting an additional
appliance
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the music stored on the external device
through the powerful speakers of Hi-Fi system.
1
Insert the USB device's USB plug into the socket
Or,
for the devices with USB cable:
a. Insert one plug of the USB cable (not
supplied) to the socket
panel of the main set.
b. Insert the other plug of the USB cable to the
USB output terminal of the USB device.
Or,
for the memory card:
a. Insert the memory card into a card reader
(not supplied).
b. Use a USB cable (not supplied) to connect
the card reader to the socket
on the front panel of the main set.
11
Installation
on the front panel of the main set.
on the front
23/8/07, 9:53
.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm239d

Table of Contents