Table of Contents
Advertisement
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
The USB device doesn't play on my
MCM239D.
The STOP 9 and some buttons on
MCM239D and its remote control have
no function.
26
MCM239D_79_Eng
✔
Select the source (CD or TUNER, for example)
before pressing the function button (É Å,í,
ë).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔
Replace the battery.
✔
Point the remote control directly toward
IR sensor on the front of the system.
✔
Check the set is switched off
✔
Set the clock correctly.
✔
Press TIMER to switch on the timer.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
It is not set in the USB mode. Select USB mode.
✔
The device is not securely connected to
MCM239D's USB port. Re-connect the device,
and make sure that the device is powered on.
✔
The device is not supported by MCM239D, or
the audio file format stored on the device is not
supported by MCM239D. Use a compatible
device/ playable audio file format.
✔
The playback of the docked player cannot be
stopped using the STOP 9 button on
MCM239D and its remote control.
The buttons ( 2;, ¡1, 2™ and VOLUME) can
✔
function only. To navigate the iPod menu, you may
use MENU, 34and OK buttons.
26
Troubleshooting
23/8/07, 9:53
Advertisement
Table of Contents
