Connecting An Additional Appliance - Philips MCM238/12 User Manual

●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
FM antenna
The wire antenna supplied can only be used to
receive nearby stations. For better reception we
recommend using a cable antenna system or an
outdoor antenna.
1
Extend the wire antenna and fit it to FM
ANTENNA as shown below
Note: If you are using a cable antenna system or
an outdoor antenna, fit the antenna plug, instead of
the wire antenna, to FM ANTENNA .
2
Move the antenna in different positions for
optimal reception (as far away as possible from
the TV, VCR or other radiation sources)
3
Fix the antenna's end to the wall.
Helpful hints:
– To receive optimal radio reception, put the main
unit and the antennas as far away as possible from
the power adaptor.
Connecting an additional
appliance
It is possible to use an additional appliance, e.g.
TV, VCR or CD recorder with the set. On
MCM238, you can playback music from an
external source.
1
Insert one plug of the audio cable (not supplied)
to the socket AUX IN at the rear panel of the
main set.
2
Connect the other end of the audio cable to the
AUDIO OUT terminal of the additional
appliance.
3
Select AUX mode on the set.
Helpful hints:
– Always refer to the owner's manual of other
equipment for complete connection.
Installation
13