Monster Miles Davis Trumpet Quick Start Manual And Warranty page 7

ENGLISH
4. Carefully push the eartips back onto the Trumpets, making sure they
are on the eartube completely.
Using The Cable Management Clip
The Cable Management Clip is designed to control the cable and keep it out of your way,
reduce accidental pulling of the earbuds from your ears, and keep the cable weight off
the in-ear headphones so they stay snug and in place in your ears.
1. Put Trumpet in-ear headphones into your ears, as you usually would when listening.
™
2. Fasten the Cable Management Clip onto your shirt around
the chest or collar area, wherever is most convenient for the
shirt you're wearing.
3. Grab the cable above the Cable Management Clip and pull
it slightly upward, sliding it through the clip to create enough
slack between the in-ear headphones and clip to allow for
head movement and to take the stress off the in-ear headphones.
9
ENGLISH
Using The Cable Slider
For further cable management, Trumpets come with a
Cable Slider. The Cable Slider is designed to reduce tangles
during storage, as well as work in tandem with the Cable
Management Clip to eliminate sway and bounce while
in use.
During use, push the slider about halfway between the
V where the cable split, and the in-ear headphones, then
adjust for your personal comfort. This will keep the cables
in a more compact position, reducing bounce and sway.
To use for the purpose of reducing tangles during
storage, push the Cable Slider all the way up to the in-ear
headphones before putting your Trumpets away. Simply
push the Cable Slider back down when ready for use.
10