Change system menu language
1
Press SYSTEM MENU.
2
Select [General Setup]>[OSD Language], and
then press
.
3
Select a language, then press OK.
4
To exit the menu, press SYSTEM MENU.
Turn on Progressive Scan
If the TV supports progressive scan output, you can
connect this unit and the TV through component
video connection. (see 'Connect TV (video)' > 'Option
4: Connect through component video sockets').
1
Turn on the TV and ensure that the TV
progressive scan mode is deactivated (see the
TV user manual).
2
Switch the TV to the correct viewing channel
for this unit.
3
Press DISC.
4
Press SYSTEM MENU.
5
Press
to select [Video Setup], then press
.
6
Select [Progressive]>[On], then press OK.
»
A warning message is displayed.
7
To proceed, select [Ok] and press OK.
»
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
•
If no picture displayed, turn off the progressive
scan mode as follows: 1) Press
compartment. 2) Press
8
Press SYSTEM MENU to exit.
•
You can now turn on the progressive
scan mode on the TV.
Note
•
During play, when progressive scan mode is on for both
this unit and the TV, distorted picture may display. Turn
off the progressive scan feature on both this unit and
the TV.
to open the disc
. 3) Press AUDIO.
5 Play
Play disc
Caution
•
Never look at the laser beam inside the unit.
•
Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc treatment
sheets.
•
Do not push on the disc tray or put any objects other
than discs on the disc tray.
1
Press DISC to select the disc source.
2
Press
to open the disc compartment.
3
Insert a disc with the printed side facing up,
then close the disc compartment.
»
Play starts automatically.
•
If play does not start, select an option
from the disc menu, and then press
•
To pause/resume play, press
•
To stop play, press
•
For MP3/WMA disc: to select an album,
press / .
•
To skip to a track/fi le/chapter, press
•
To fast backward/forward, press and hold
/
.
Note
•
This feature is only available for DVDs/DivX videos
recorded with multiple subtitle languages.
•
During play, press
to select a subtitle language.
Play from USB
Note
•
Ensure that the USB device contains playable content.
(see "USB playability information")
1
Flip open the USB socket cover on the front
panel.
2
Insert the USB plug of a USB device into the
USB socket.
.
.
.
/ .
SUBTITLE repeatedly
EN
15