Programming Track Numbers; Reviewing The Programme; Erasing The Programme - Philips MC-20/25 User Manual

1
To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
Press PLAY•PAUSE 2; (on the remote
2
control 2) to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
¶ You can also press STOP 9 to cancel your play
mode.

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
Press PROGRAM on the system or remote
control to enter the programming mode.
➜ A track number is shown and
flashes.
Use the PREV ¡1 or NEXT 2™ on the
2
system, (on the remote control ¡ or ™) to
select your desired track number.
3
Press PROGRAM to confirm the track number
to be stored.
➜ The number of tracks programmed and total
playing time of the programme is shown briefly,
then the selected track and PROG.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to
programme more than 20 tracks.
5
To start playback of your disc programme, press
PLAY•PAUSE 2; (on the remote control 2).
pg 001-021/MC20/22-Eng

Reviewing the programme

In STOP mode, press and hold down
PROGRAM on the system or remote control,
for a while until the display shows all your stored
track numbers in sequence.

Erasing the programme

You can erase the programme by:
¶ pressing STOP 9 once in the STOP mode;
¶ pressing STOP 9 twice during playback;
¶ opening the CD compartment;
➜
PROGRAM
PROGRAM
13
Compact Disc
disappears from the display.
12/7/00, 1:31 PM
3140 115 27782
13