Tuner; Tuning To Radio Stations; Programming Radio Stations; Tuning To Preset Radio Stations - Philips MC-20/25 User Manual

Tuner

TUNER
TUNER
STANDBY
ON
SELECT
SOURCE
DBB DSC
INTERACTIVE SOUND
iR SENSOR
STOP PRESET
REPEAT TUNING RECORD
REV MODE
BAND
PREV

Tuning to radio stations

1
Select TUNER source.
➜ TUNER is displayed briefly.
2
Press BAND once or more to select your
waveband.
3
Press down on TUNING à or á and release
button.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
➜ If a FM station is received in stereo,
shown.
4
Repeat step 3 if necessary until you find the
desired station.
¶ To tune to a weak station, press TUNING à
or á briefly and repeatedly until you have
found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
Press PRESET 4 or 3 ( ¡ or ™ on the
1
remote control) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
14
pg 001-021/MC20/22-Eng
PROGRAM
TIMER
PROGRAM
TIMER
ON•OFF
INCREDIBLE SURR.
VOLUME
PLAY•PAUSE

RDS

CLOCK
TUNING
SHUFFLE
SIDE A/B
NEXT
is
STEREO
14
2
Press PROGRAM on the system or remote
control for more than 2 seconds to activate
programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW and LW. The last
preset automatically stored will then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM on the system or remote
control to activate programming.
➜
flashes in the display.
PROGRAM
Press PRESET 4 or 3 (¡ or ™ on the remote
3
control) to allocate a number from 1 to 40 to
this station.
4
Press PROGRAM again to confirm the setting.
➜
disappears, the preset number and
PROGRAM
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
¶ You can override a preset station by storing
another frequency in its place.
Tuning to preset stations
¶ Press PRESET 4 or 3 ( ¡ or ™ on the
remote control) until the desired preset station
is displayed.
RDS
(some versions only)
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
¶ Press RDS briefly and repeatedly to scroll
through the following information (if available):
– Station name
– Programme type such as NEWS, SPORT,
POP M ...
– Radio text messages
– Frequency
12/7/00, 1:31 PM
and the
3140 115 27782