Advertisement
Original BMW Accessories.
Installation Instructions.
Retrofit Park Distance Control (PDC), front and rear
BMW 7 Series (E 65) LHD
Retrofit kit No.:
Installation time
The installation time of approx. 6.0 hours may vary depending on the vehicle's condition and
equipment.
The installation time given does not include time needed for programming/encoding.
The total costs for the programming time should be taken into account when calculating retrofitting
costs (reimbursement through warranty is not permissible).
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation
and by authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW
cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals
and work instructions, in a rational order, using the specified tools (special tools) and observing current
health and safety regulations.
In the event of installation or functional problems, limit troubleshooting to 0.5 hours for
mechanical jobs and 1.0 hours for electrical jobs.
To avoid unnecessary work and costs, send a corresponding enquiry via the Aftersales Assistance
Portal (ASAP) using the technical parts support application.
Please quote the following:
- Vehicle identification number
- Part number of retrofit kit
- Exact description of the problem
- Work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!
Pictograms
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or other text.
© BMW AG, Munich
66 20 0 146 507
Retrofit kit Park Distance Control
01 290 149 181
11/2008
(T/S)
1
Advertisement
Related Manuals for BMW 66 20 0 146 507
Summary of Contents for BMW 66 20 0 146 507
- Page 1 These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
- Page 2 Ensure that the cables/lines are not kinked or damaged as you install them in the car. Costs incurred as a result of this will not be reimbursed by BMW AG. Additional cables and/or lines that you install must be secured with cable ties.
-
Page 3: Table Of Contents
Circuit diagram ..............16 © BMW AG, Munich... -
Page 4: Parts Overview
Cable tie (30x) Bumper strip, front right (1x) Bumper strip, front left (1x) Bumper strip, rear (1x) Cable tie for bumper panel (5x) Pin contact (20x) Individual seal (20x) © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) -
Page 5: Preparatory Work
51 43 240 Bottom right cover on C-pillar 51 43 230 Luggage compartment floor trim panel 51 47 101 Luggage compartment wheel arch trim panel, right 51 47 161 © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) -
Page 6: Connections Diagram, Pdc Wiring Loom
At 18-pin black connector from PDC control unit X18362 BRWS/SWGR/ GEGR/BRGR/ SWBL/GEBL/ BRBL/SWGE/ GEGN/BRGE 18-pin white socket housing SWWS/GEWS/ At 18-pin white connector from PDC control unit X18013 BRWS/SWGR/ GEGR/BRGR/ SWBL/GEBL/ BRBL/SWGE/ GEGN/BRGE © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) - Page 7 Pin contacts SWWS/GEWS/ In 12-pin black pin housing A12 X10647S BRWS/SWGR/ GEGR/BRGR/ SWBL/GEBL/ BRBL/SWGE/ GEGN/BRGE 12-pin black pin housing At 12-pin socket housing of front converter X10647S wiring loom © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S)
-
Page 8: Connections Diagram, Converter Wiring Loom
3-pin black socket housing SWGE/GEGN/ At ultrasonic converter, front right X18019 Brown/yellow 12-pin black socket housing SWWS/GEWS/ At 12-pin black pin housing of PDC wiring X10647B BRWS/SWGR/ loom GEGR/BRGR/ SWBL/GEBL/ BRBL/SWGE/ GEGN/BRGE © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) -
Page 9: Installation And Cabling Diagram
Power module PDC control unit 10 Ground pin 11 Ultrasonic converter, rear right 12 Ultrasonic converter, rear centre right 13 Ultrasonic converter, rear centre left 14 Ultrasonic converter, rear left © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) -
Page 10: Installing Park Distance Control
Connect and lock branch A4 at 18-pin white connector X18013 of PDC control unit D. Connect and lock branch A5 at 12-pin black connector X300 of PDC control unit D. © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) - Page 11 A8, A9 and A10 of PDC wiring loom A to the left behind the glove compartment. Secure PDC wiring loom A with cable ties to the existing wiring harness (1). © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S)
- Page 12 L from the parts kit (not illustrated ). Route branch A11 in right-hand A-pillar up to grommet (1). Pass branch A11 through grommet (1) into engine compartment. © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S)
- Page 13 R. Check for firm fit. The pin contacts R can only be unplugged again with a special tool that is not always available in the BMW dealership organisa- tion. After plugging pin contacts R into 12-pin pin housing A12, the pink latches (2) of 12-pin pin housing A12 must be carefully slid towards the middle.
- Page 14 (1) (not illustrated). Fit four holders for ultrasonic converters F and rear ultrasonic converters G in rear bumper strip P according to TIS instructions 66 20 540 (not illustrated). © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S)
-
Page 15: Finishing Off And Coding
- Program/encode retrofit with DISPlus, MoDIC III or GT-1 with CIP application and follow the user prompt - Perform quick test - Perform function test - Reassemble vehicle in reverse order of removal © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) -
Page 16: Circuit Diagram
Circuit diagram © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S) - Page 17 X18023 3-pin black socket housing at PDC converter, rear right X18362 18-pin black socket housing at PDC control unit Cable colours Grey Yellow Orange White Green Brown Black Blue © BMW AG, Munich 01 29 0 149 181 11/2008 (T/S)