Bluetooth Operation; Pairing A Bluetooth-Enabled Device With The System - Philips BTM630/12 User Manual

The Bluetooth capabilities of BTM630 enable it
to receive audio from various other Bluetooth-
enabled devices wirelessly (for example, a mobile
phone, PDA etc.) within a range of
approximately 10 meters (30 feet).
Supported Bluetooth profiles
Your system supports the following Bluetooth
profiles:
Hands-Free Profile (HFP)
Headset Profile (HSP)
Advanced Audio Distribution Profile (A2DP)
Audio Video Remote Control Profile (AVRCP)
Note:
– Before pairing a Bluetooth-enabled device with
this system, please first read the user manual of
the device to check whether it supports any of the
above profiles.

Bluetooth Operation

Pairing a Bluetooth-enabled
device with the system
IMPORTANT!
– The Bluetooth transmitter and
receiver hardware in this system has an
approximate operational range of 10
meters (30 feet) in open space. Generally
Bluetooth devices can communicate with
each other clearly within a regular sized
room or office. Operation between
different rooms will depend on the
construction of the room. It is important
to recognize the fact that Bluetooth
communication range may be
substantially reduced if the signal passes
through a solid object. Human bodies,
brick and concrete walls, and heavy
furniture or bookcases will reduce the
operational range of your Bluetooth
devices. Glass, dry-wall or wood paneled
walls and office partitions may have a less
severe but noticeable effect. You should
position your Bluetooth devices closer to
each other if you observe
communication difficulties.
– Please familiarize yourself with the
Bluetooth capabilities of your device
before connecting it to this system.
Compatibility with all Bluetooth devices
is not guaranteed!
– Keep the system away from any other
electronic device that may cause
interference, e.g., a PC or microwave
oven.
1
Place the Bluetooth-enabled device for pairing
within 8 meters (30 feet) from the system.
2
Press SOURCE on the top of the system (or
BLUETOOTH on the remote control) to
select the Bluetooth source.
➜
"BT" appears on the display panel.
3
Press and hold ANSWER/PAIRING
top of the system or the remote control for
more than 3 seconds.
➜
"PAIRING" starts flashing on the display panel.
4
Set the Bluetooth-enabled device to search for
other available Bluetooth devices until it
recognizes "PHILIPS BTM630". (Refer to the user
manual of the device to be connected for
detailed operations.)
on the
25