Table 5: Zone System Settings - Aprilaire 6000 Series Safety & Installation Instructions

TABLE 5: ZONE SYSTEM SETTINGS

System Setting
Number of Zones
Staging Based On
Zones to Stage
Zone 1 Weighting
Zone 2 Weighting
Zone 3 Weighting
DAT Sensor
DAT Low Limit
DAT High Limit
Downstage on DAT
18
Description
Number of zones detected.
Staging based on Zones.
Selects how many Zones are required to stage up. Note: Only option if ZONES is
enabled.
The amount of precedence each zone has.
The amount of precedence each zone has.
The amount of precedence each zone has.
Enables or disables the DAT sensor.
Low Temperature Limit. Safety limit at which the HVAC equipment will turn off.
Note: Only option if DAT Sensor is enabled.
High Temperature Limit. Safety limit at which the HVAC equipment will turn off.
Note: Only option if DAT Sensor is enabled.
Allows panel to downstage multistage equipment when DAT temperature comes
within 5°F high or low limit. Note: Only option if DAT Sensor is enabled.
Factory Default Settings (bold)
and Settings Range
1
2
3
Zone
Number of Zones
2
1-9
1
2
3
1
2
3
1
2
3
Yes
No
30°F to 45°F
(2.5°F steps / 35°F)
110°F to 170°F
(5°F steps / 160°F)
Yes
No