Using The )Continue Command - IBM 5110 User Manual

70
Using the )CONTINUE Command
Advantages:
It
Even if the active workspace contains suspended functions or open
data files exist, the active workspace can be written to the media.
Any open data files or suspended functions can be restored by the
)RESUME command. The )RESUME command is discussed in more
detail under Getting Data from a Tape or Diskette File in this
section.
•• The active workspace is written to the media faster than when the
)SA VE command is used.
.. The stored workspace is loaded into the active workspace faster
than when the )SAVE command is used to write the workspace to
the media.
Disadvantages:
.. The )COPV and )PCOPV command cannot be used to copy variables
or user-defined functions from the stored workspace .
• The stored workspace can only be loaded into a 5110 with an active
workspace at least as large as the original active workspace.
• The additional storage is not available to the user when the stored
workspace is loaded into a 5110 that has a larger active workspace
than the original active workspace.