Chapter 6. Library Control
The tape or diskette files where you store information is your library.
In this chapter, the following topics concerning the 5110 library control
are discussed:
• Determining the size of a tape or diskette file
• Writing data to a tape or diskette file
• Getting data from a tape or diskette file
• Controlling files in the library
• Maintaining data security
References are made to some of the 5110 system commands; for
example, the )MARK command or the )RESUME command. See the
IBM 5110 APL Reference Manual, SA21-9303, for a complete
description of the system commands. The description includes the
required syntax for each system command. You must use the proper
syntax to enter a system command so that the 5110 will accept that
command.
Library Control
67