Table of Contents
Advertisement
#
Fan Speed Selection
When pushing one of these buttons
0 , the fan speed will correspond to the particular position
of lever (4).
The volume of fresh air supplied to the vehicle interior can
be increased by pushing lever (4) to the right.
The fan speed may be changed by moving lever (4) to
position " II" , " III" or " max" .
Function 0 = Continuous max. air volume.
24
mm,
0
or button
Fast Cooling
•
Turn temperature selector wheel (1) and lock in
extreme end position " MIN".
•
Push button S
or ( H in mode control (3).
•
Push 0 button.
•
Push lever (4) to far right " max" position.
•
For maximum air flow push up levers (6) and (8).
•
Close windows and sliding roof completely.
Open the windows and/or sliding roof long enough to let
hot air inside the car escape. This helps reduce the time
the air conditioner must run before the car cools. Then,
close windows and/or sliding roof and allow air conditioner
to operate normally.
Hide quick links:
Advertisement
Chapters
Table of Contents
