Technical Data; Defi Nitions: Safety Guidelines - DeWalt D271059 Original Instructions Manual

LASER D271059
Congratulations!
You have chosen a D WALT product. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional users.

Technical data

Voltage
UK & Ireland
Laser power
Laser class
Wavelength
Operating temperature
Weight
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
D271059
V 230
Safety Instruction for Lasers
V 230/115
mW < 1
• Keep work area clean
2
nm 630 ~ 680
°C 0 – +40
• Keep children away
kg 0.75
• Use appropriate tool
• This laser complies with class 2 according to
• Do not use the laser for any purpose other than
• Do not operate the laser in explosive
• Do not use optical tools such as a telescope or
• Turn the laser off when it is not in use. Leaving
• Do not remove or deface warning labels. If labels
• Before fi rst use, check that the safety warnings
WARNING: To reduce the risk of injury,
read the instruction manual.
SAVE THESE INSTRUCTIONS
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Cluttered areas and benches can cause
accidents.
Do not operate the laser around children or allow
children to operate the laser. Serious eye injury
may result.
The intended use is described in this instruction
manual.
EN 60825-1:2007. Do not replace a laser diode
with a different type. If damaged, have the laser
repaired by an authorised repair agent.
projecting laser lines.
atmospheres, such as in the presence of
fl ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
transit to view the laser beam. Serious eye injury
could result.
the laser on increases the risk of staring into the
laser beam.
are removed, user or others may inadvertently
expose themselves to radiation.
on the label have been formulated in your
language. Do not use the tool if it does not carry
the warnings in your language!
E N G L I S H
17