Table of Contents
Advertisement
Basic Operations
POWER
Loading discs and switching on
1
Press OPEN to open the disc door.
The disc door opens.
2
Insert your chosen disc, label side up (also when
a double sided DVD disc is inserted). Make sure it is
sitting properly in the correct recess.
3
Gently push to close the door.
4
Slide the TV OUT / TFT ON to the appropriate position.
TV OUT: When player is connected to additional viewing
equipment.
TFT ON: When you are viewing discs from the
player's LCD.
5
Slide the POWER switch to ON to switch on the player.
➯
TIP
-
A normal mechanical noise is heard during playback.
Playing a DVD disc
After switching on, inserting the disc and closing the door,
playback starts automatically. The screen shows the type of
disc loaded. The disc may invite you to select an item from a
menu. Use the 3,4,1, 2 keys to highlight your selection,
and press OK.
Note: Since it is usual for DVD movies to be released at
different times in different regions of the world, all players
have region codes and discs can have an optional region
code. If you load a disc of a different region code to your
player, you will see the region code notice on the screen.
The disc will not play, and should be unloaded.
Playing an audio or video CD disc
After switching on, inserting the disc and closing the door, the
screen shows the type of disc loaded as well as information
about the disc's contents. Press 2 to start playback.
BASIC OPERATIONS
13
Advertisement
Table of Contents
