Advertisement
Quick Links
Installation Instructions
for your new
TRASH
MASHER* COMPACTOR
BEFORE YOU USE YOUR COMPACTOR
Be sure your compactor is properly installed in an appropriate
level area and a place suitable for the size, function and prolec-
tion of the compactor.
ELECTRICAL REQUIREMENTS
Observe
All Governing
Codes and Ordinances
A 120-Volt, 60-H& AC only, 15-Ampere,
fused electrical supply is required. (Time delay fuse or circuit breaker is
recommended.)
It is recommended
that a separate circuit serving only this appliance be provided. DO NOT use an
extension cord:
-
.
RECOMMENDED
GROUNDING
METHOD
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE
THE
POWER
SUPPLY
CORD
GROUNDING
PRONG.
3-PRONG
GROUNDING
TYPE
For your personal safety, this appliance
must be grounded.
This appliance is equipped with a power supply cord having a
3-prong grounding plug. To minimize possible shock hazard,
the cord must be plugged into a mating 3-prong grounding type
wall receptacle, grounded in accordance with local codes and
ordinances. If a mating wall receptacle is not available, it is the
personal responsibility
and obligation of the customer to have
a properly grounded, 3-prong wall receptacle
installed by a
qualified electrician.
See figure
7.
WALL
RECEPTACLE
-
POWER SUPPLY
CORD
FIGURE 1
' Trademarks
in Canada Used by Authority of Canadian Trademark Owner, WHIRLPOOL
CORPORATION,
U.S.A.
- IMPORTANT -
00 NOT REMOVE THIS lNSTt?UCTlolv SHEET UNTIL READY FOR INSTALLATION.
AFTER COMPLETING THE INSTALLATION, SAVE THESE INSTRUCTIONS FOR FUTURE USE.
1
Part No. 4152819
Advertisement
