Selecting The Colour System That Corresponds To Your Tv - Philips DVP720SA/69 User Manual

To deactivate Progressive manually -
cont'd
If the progressive function is activated, but
your TV does not support progressive
function or YPbPr cable is not connected
accordingly, there will be a blank screen.
You can deactivated progressive function
as below:
1
Press STANDBY ON on the front panel
to switch on the DVD player.
2
Press OPEN/CLOSE on the front panel
to open the disc tray.
3
Press 1 then, press MUTE on the
remote control.
➜
You should see the Philips DVD
background screen on the TV.
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
1
Press SYSTEM MENU.
2
Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3
Press 34 to highlight {TV TYPE}, then
press 2.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-34 DVP720_AP2
4
Press 34 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5
Select an item and press OK.
Helpful Hints:
– Before changing the current TV
Standard setting, ensure that your TV
supports the 'selected TV Type' system.
– If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
SYSTEM MENU
13
Getting Started
.
3139 246 13522
28/07/2004, 3:28 PM
13