Video Cassette Playback 17 - Philips DVP620VR/78 Owner's Manual

H9622MD(EN)1_46.qx4 04.4.8
Read and follow the steps below to play a tape.
1
Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 6-14.
2
With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The VCR
light will appear on the front of the DVD/VCR. If the tape's
record tab has been removed, play will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary.The VCR light will
appear on the front of the DVD/VCR.
3
If playback does not start automatically, press VCR,
then press PLAY B.
4
Press STOP C to stop playback.
5
Press h to rewind the tape.
6
After the tape stops, press STOP/EJECT CA on the
front of the DVD/VCR to remove the tape.
5:03 PM Page 17

Video Cassette Playback 17

1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
SEARCH
REPEAT REPEAT
SUBTITLE
RETURN
3
VCR
DISC/VCR
MENU
5
4
STOP
TIMER SET
SPEED
4
8
6
Press STOP/EJECT C
on the DVD/VCR.
Helpful Hints
• Other tape playback features are
on pages 39-46.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 39.
• You must connect the DVD/VCR to
a TV using the RF coaxial cable or
the audio/video cables in order to
use the VCR features.These hookups
are explained on pages 7 and 10.
STANDBY-ON
MODE DISPLAY
AUDIO
A-B
ZOOM ANGLE SKIP / CH
TITLE CLEAR/RESET SLOW
VCR/TV DVD
SYSTEM
MENU
OK
PLAY PAUSE
MARKER RECORD
1 2 3
5 6 7
9 0 +10
A